tent too hot cannabis

Keeping Temperatures Down In Summer For Your Indoor Grow

Growing indoor marijuana in summer can present some unique challenges. Cannabis grows best within a particular temperature and humidity range. These top tips will help you keep your indoor cannabis happy this summer.


Summer is coming, and the lucky outdoor grower is stoked. Plenty of sun, wind, and even rain makes for superb cannabis. For the indoor grower, summer is a different story with its own unique set of challenges.

Cannabis grows best indoors under high-intensity discharge (HID) lights, which do their best to imitate the sun. The side effect of generating lots of lumens is heat. Most heat is created by light ballasts, but globes still emit enough heat to burn plants. Add to this some high summer temperatures, and environments can quickly become unsuitable for proper growth.

When addressing heat concerns, humidity will also need to be considered. Heat and humidity go hand-in-hand. Warmer air is more capable of carrying moisture, raising the relative humidity (RH) of the grow space. Even well-vented spaces will not drop in humidity if the inlet air is warm and already moisture-laden. Humidity can be a marijuana flower’s worst enemy, causing ideal conditions for pests and pathogens.


Cannabis grows best when provided with ideal temperatures and humidity levels for each phase of growth. Staying within these limits is the challenge facing the summertime grower.

Late Flowering


Cost can be the primary factor in deciding whether to grow in summer or not. When yield-to-cost is considered, a summer crop is always cost-effective. Mechanical intervention is more expensive to run, but the relative amount of cannabis produced outweighs the costs ten fold.

Before spending money on equipment, make sure your grow space optimises passive heat control measures. Providing the coolest ambient air temperatures is the first step in combating summer heat.

  1. By nature, electronics generate heat. Keep as many motors, ballasts, pumps, and timers that run on electricity out of the grow room. It ends up being far more convenient to have a single spot where everything is accessible at a glance.
  2. Have your grow space on the northern side of the house in the Northern Hemisphere. These rooms never receive direct sunlight on their roofs or walls.
  3. Source fresh intake air from a cool place. Sub-floor is ideal, but fresh air is the absolute minimum requirement. Put exhaust outlets as far away as practical for your situation. Try and vent to the outside, or at least another room or roof space. A 400W lamp will heat a standard room very quickly.
  4. If the grow room is on a sunward side, especially the west side of a building, make efforts to shade the room. Plant quick-growing vines to protect the walls. Install awnings or sunshades.
  1. Grow at night. Make your day cycle during the night. Expect a 10–15°C difference in ambient air temperature at night.
  2. Bottles of frozen water, rather than ice cubes are a resource-friendly way to add cool to the room. A 2-litre bottle in front of a fan cools the airstream considerably, without adding moisture to the air. Ice cubes evaporate and increase humidity.
  3. Use insulation where practical. If building a grow room, insulate the complete structure well. Foam core panelling is quick and easy, is very soundproof, and also easy to clean. Flexible rolls of insulation can be used to drape over grow tents or pack around smaller spaces. Insulation also reduces the heat signature of clandestine grows in cannabis-unfriendly countries.


Having complete control over the grow room environment will mean installing mechanical solutions. Initial outlay or price of upgrading will be offset by fat buds before summer ends.

  1. First, you will need a hygrometer and a thermometer, or a combo unit. This way, you can maintain environmental conditions with complete accuracy. Advanced kits act as switches that run the complete environmental system automatically.
  2. Use exhausted light covers to control radiated heat from globes. This is a minimal investment, and should be considered when setting up a grow.
  3. Dimmable ballasts give you some control over the radiated heat from lights. Turning down the wattage during the hottest parts of the artificial day, but not interrupting the grow cycle, can cut heat output in half from the lights, and keep plants growing steadily.
  4. Make sure air circulation is thorough. Still air is the enemy of marijuana. Put pedestal fans and mount wall fans where they provide the best air movement around plants. Always have them set on oscillate.
  5. Opt for larger intake and exhaust fans. Larger fans running on a lower setting are more effective than small fans running on overdrive.
  1. Make sure all ducting is unobstructed and kink-free, and avoid sharp angles when changing direction. Interrupted airflow makes the fans less efficient.
  2. Air conditioning units are relatively inexpensive and will ensure correct temperatures in summer. When connected to a temperature switch, temps will automatically stay in the desired range. Where possible, connect the AC unit to a fresh air intake to aid in air exchange. Reverse cycle units will act as heaters when winter arrives.
  3. Optimum humidity can mean adding or subtracting moisture from the air. Combination humidifier/dehumidifier units ensure stable humidity. Set the unit to the ideal humidity for each phase of growth. Check reservoirs regularly and fill or empty as needed. Lower humidity means lower temperatures are more easily maintained.
  4. LED lighting can reduce temperatures significantly. They use energy differently than HID lights and produce far less heat. Growing with LEDs is a bit different, so do some research first. The lack of heat is what will need to be considered when the cooler months arrive.
  5. Reservoir chillers are electrical units that keep water in the reservoir at an ideal temperature. Protecting roots from heat prevents plants from slowing their growth due to heat stress. The cool water flowing through the system also acts like a passive air conditioner, helping to keep ambient temps down.

Increasing overall metabolism helps plants resist the effects of heat. Bigger, healthier, and more robust plants will tolerate environmental extremes better. When CO₂ density is increased to 1,200–1,500ppm, ideal gas exchange happens at 29°C.

The extra few degrees of heat is a good thing when using carbon dioxide. However, enhanced plant metabolism means extra demands all around. The plants will take up more water and nutrients, and will require extra ventilation. Check the nutrient reservoir more often.


Growing in summer can be a challenge. Especially so for those grows closer to the equator. A common sense, passive setup with mechanical intervention when necessary makes summertime growing drama-free.

You might feel it in the hip pocket to start with, but it will balance out over the life of the equipment. The investment is relative to multiple crops over a number of years. Smelly, fat, home-grown buds have a mystique all their own. No matter the season, they are always worth it. Happy summer growing.

Marijuana grows best when it's kept within a particular temperature and humidity range. Here are the top tips for growing summer weed indoors.

5 Secrets to Controlling Heat Indoors

Table of Contents

Controlling heat in the grow room is one aspect of growing marijuana indoors that can be difficult for many of us growers. Grow lights provide our plants with lots of life-giving light, but they also produce heat, and big grow lights can produce a lot of heat!

Most cannabis plants start suffering when their temperature gets over 80-85°F (27-30°C), so it’s important to keep your grow space below that threshold. This tutorial will teach you tactics that you can use to control temperature and fix heat problems. You’ll also get some tips to help make sure your cannabis plants do great even if it gets too hot!

A little heat causes problems, but if it’s not too severe plants can still grow slowly

Too much heat can actually kill your cannabis plants (especially in the budding stage!)

Sometimes plants keeps making new pistils on the parts of the buds that are closest to the light when they’re experiencing heat or light stress.

What can you do to protect your cannabis plants from heat damage?

1.) Supplements That Protect Against Heat Damage

Some supplements can help protect your cannabis plants so they are more resistant and/or recover more quickly from heat stress.

However, many different companies offer supplements and it can be confusing to decide which one – if any – is best for your garden.

Try to get supplements and nutrients from the same company

For the most part, there is no best supplement for heat (or anything really). A lot of different supplements will get you to the same place in the end. Because of that, when possible it’s a good idea to choose supplements made by the same company as your nutrients instead of trying to find the “best” supplement.

This is because during the process of creating a complete nutrient lineup, nutrient companies specifically test their supplements to make sure they work together with the nutrients in their lineup nutrients without causing lockout or other unexpected problems.

So if you’re using the General Hydroponics Flora Trio nutrients like I do, it means it’s much safer for your plants to add supplements by General Hydroponics if possible. If you were using Botanicare nutrients you’d look at the supplements that Botanicare carries, etc. Learn about different types of nutrients for growing cannabis.

Use supplements to help protect your plants from heat damage!

Seaweed Kelp Extract

One of the best inoculants against heat stress is a surprising gift from the ocean; seaweed! As a bonus it contains small amounts of trace nutrients and minerals. Many different nutrient companies use seaweed kelp extract as part of their supplement lineup, which means you have a lot of choices to choose from if you want to incorporate seaweed into your grow.

A few companies offer seaweed extract by itself like Neptune’s Harvest Liquid Seaweed which are a great choice for those growing outdoors or in super soil as they contribute to a healthy soil web matrix.

Pure sea kelp extract can be a great choice for soil growers who want to avoid using mineral-based nutrients

If your nutrient company doesn’t offer a specific Sea Kelp product, you can almost always find sea kelp extract as an ingredient in one or many of their supplements. For example General Hydroponics has a great all-in-one supplement called Floralicious Plus that contains several ingredients that work together to not only protect your plant against heat with seaweed extract, but can help it to produce better in other situations, too.

When starting out with supplements, it’s often best to start with something that matches your base nutrients and has sea kelp extract as an ingredient, like Floralicious Plus by General Hydroponics.

Silica Supplement

Supplementing your plants with extra silica (listed on the label of supplements as Potassium silicate) is not usually needed for healthy plant growth. There is almost always some amount of silica available and plants don’t need a whole lot of silica to survive.

That means if your plants aren’t stricken with a – super rare – silica deficiency and are living in a great environment, adding extra silica might not give you tangible benefits. However, if your cannabis plants are under specific types of stress or are generally living in adverse conditions, extra silica can make life easier for everyone!

Plant roots with access to silica (Si) happily drink it up and the silica gets incorporated into plant cells, increasing the strength of individual cell walls. These “armored” cells help improve the hardiness, vigor and structure of the plant in many ways.

Benefits of Silica Supplements

  • Plants supplemented with silica are generally more resistant to heat or cold stress as well as some types of disease
  • Silica increases the microscopic “abrasiveness” of leaves, which can act as a deterrent to pests and herbivores (like deer). In fact, if you’ve ever been given a paper cut by a piece of grass, you can thank silica for making those “sharp” edges.
  • Silica helps plants get the nutrients they need. Silica is effective at making phosphorus more available to the plant, which can be helpful in the flowering stage when the plant is going through phosphorus at a much higher rate due to the process of making buds.
  • Silica can also help the plant roots better absorb micronutrients (including boron, copper, iron, manganese and zinc) while making it harder for the plant to absorb certain toxic substances like aluminum and salt/sodium.

So again, silica won’t magically increase your plant growth, but it can help make up for some problems with the environment. Because of this, nearly all professional nutrient companies carry a quality silica supplement as part of their lineup.

I like Armor Si by General Hydroponics, but again that’s because they make my base nutrients. There is a silica supplement available from almost every major nutrient company out there and you’re least likely to run into problems if you go with the company that matches your nutrients.

Note: Silica supplements (or more specifically Potassium silicate) will raise the pH of your water, so you may need to use a little bit extra PH Down. Learn more about pH.

Root Health Supplement (Essential for Hydroponic Growing in Heat)

When growing cannabis hydroponically (and to a lesser extent when growing in soil or coco) it’s very easy for your roots to start running into problems like root rot when the temperature starts getting too high.

The types of microorganisms that attack roots thrive in hot, wet conditions without much oxygen. So not only does heat bother your plants directly, the roots may become diseased. Unfortunately, in hydroponics your water can’t hold as much dissolved oxygen when it’s hot, and dissolved oxygen is one of the best ways to fight off root disease.

So it’s sort of a double-whammy for plants grown hydroponically when it gets too hot in the grow room: they’re getting less oxygen AND becoming more vulnerable to root rot.

Besides using an air pump with large air stones to create lots of bubbles in your reservoir (learn more about growing cannabis hydroponically), the best thing you can do to keep roots healthy is control the heat.

Unfortunately as you know, controlling the heat is often easier said than done!

Luckily there are some products that are made up of beneficial bacteria and other microorganisms that specifically fight root rot. These work by out-competing the bad microorganisms in your water reservoir and populating your reservoir with friendly ones that actually help your roots.

Drooping is often the first sign your plants are suffering from root rot

Plants with root rot may also start getting what looks like various nutrient deficiencies, but the true cause is actually the unhealthy roots

My product of choice for fighting root rot is Hydroguard by Botanicare. Normally I only use nutrients and supplements by General Hydroponics but in my experience this product has been the best for fighting root rot in DWC / hydro, so I use it specifically. I’m definitely not saying it’s the best root supplement out there, but it’s the best one I’ve ever used and I want to recommend something I know for sure will work. It doesn’t change the pH of the water, and it doesn’t interact with other supplements. I’ve seen it actually fight root rot directly, even when its hot, and I never go a grow without it.

I’ll be honest, I grow hydro and my grow room is too hot for most of the year. Because of that, every time I stop using a root supplement like Hydroguard I can see my roots start getting slimy, sometimes within a week. But as long as I use a teaspoon of this supplement with my reservoir changes I have white, healthy roots even in the heat!

I realize this isn’t a direct method to combat heat; rather, it’s a way to help deal with the consequences of too-high heat when it can’t be controlled. It’s best to control the heat in your grow area, but if that’s impossible Hydroguard will help keep your roots healthy in DWC / Hydro! It’s cheap and a little bit goes a long way. A 1-quart bottle will last you more than one grow!

2.) Environment Hacks

Add CO2 to the Air

Plants can easily survive in temps up to 95°F (35°C) when the air is being supplemented with extra CO2. However, for CO2 to make a difference to your plants, you need relatively strong grow lights (i.e. not CFLs or T5s). But for those with HPS or LED grow lights, adding extra CO2 can result in faster growth as well as making it so plants can better handle the heat.

Learn how to add CO2 to your grow
Choose Hand-Watered Grow Over DWC/Hydro

Growing cannabis hydroponically can give you some of the fastest growth rates of any style of growing, but as mentioned earlier, hydro does not really play well with hot temperatures because too much heat tends to trigger root problems and slower growth.

We talked about supplements that help prevent root rot for hydroponic plants, but the next step is to cut out the water reservoir altogether and go for a hand-watered grow. That’s because hand-watered plants are inherently much more resistant to high temperatures. Not only are the roots relatively safe from the heat (unlike in hydro) but the growing medium can hold a lot of oxygen no matter what the temperature (a lack of oxygen at the roots causes major problems in hydro).

Plants Grown in Containers or in the Ground Tend to Be More Resistant to Heat Compared to Hydro

Soil in regular containers is probably the most common way to grow cannabis indoors, and that combo works great.

But when it comes to growing in hot temps, coco coir may be a better choice than soil. In particular, coco coir inherently has properties and hormones that encourage healthy root growth and promote hardiness against heat.

  • Soil is a good choice, but coco coir is better when it comes to heat
  • Use Smart Pots (fabric pots) instead of regular containers as further protection against heat

Choosing Smart Pots (fabric pots) over a regular container will also help with the heat. Smart pots help increase evaporation, which not only decreases the chance of overwatering, it keeps roots healthy by providing plenty of oxygen from the sides.

Growing cannabis with coco coir in fabric pots is one of the best ways to grow if you want your plants to be able to resist the heat. These coco-grown plants were regularly exposed to temps that crept up over 85°F (30°C), and although that wasn’t ideal they made it to harvest just fine.

Keep Roots Cool

Your plant is much more resistant to heat if the roots don’t cook too, whether you’re growing in a pot or in a hydroponic reservoir. If you can find a way to help keep the roots around 70°F (21°C), your plant will suffer less and recover more quickly from a hot spell!

Watering your plant regularly when it’s hot will definitely help keep roots from drying out, and adding mulch on top of your soil can help retain moisture and keep roots cooler. Placing your potted plant inside a bigger, ceramic pot (or otherwise finding a way to block the pot from direct light) can also help protect roots from the heat!

Use Fan Placement to Reduce Electricity & Bring Down Temps

Air conditioners can easily control the heat in any room but they use a lot of electricity, which can get expensive really fast! Unfortunately, a lot of growers are using an AC (or just dealing with too much heat) when they could actually reconfigure their fans to be able to maintain the right temps without needing an AC at all.

Proper fan placement can also help save costs because if you use fans more effectively you can use less of them. Fans use a surprising amount of energy that can really add up over time. In a 4-month grow with a 250W light, I spent a total of $161 for the electricity of the grow light, yet I spent $107 to run an exhaust fan and two tiny oscillating fans. So the fans used a significant amount of my total energy used, which means you also don’t want to be filling your grow space with tons of fans if you don’t need to!

Being smart about fan placement can save you a lot of money!

Exhaust Fans

Make sure your exhaust fan is set up to make sure you have the most cooling power. Here are some tips

  • Your exhaust fan should be strong enough for your space (for higher powered lights, use a real exhaust fan instead of a cheap ducting fan). Learn more about choosing the right exhaust fan.
  • Heat rises to the top of your grow tent/area, so make sure your exhaust fan is located at the top of tent pointing out.
  • You want a lot of area to intake air, about 4x the size of your exhaust hole if possible. With grow tents, this is usually accomplished by opening multiple port. When the intake hole is too small it’s hard on your fan, the exhaust won’t be able to vent as much hot air and the walls of your tent will bow.
  • The intake hole should have direct access to cool, fresh air. The inside of the grow space is always going to be at least a few degrees above the temperature of the intake air, so if the intake air isn’t cool the grow space will be even hotter. Cool air stays lower to the ground, so make sure your intake ports are as close to the floor as possible.
  • Learn more about setting up exhaust system


Keep all ducting as straight and short as possible. You want a short direct line to the window so that hot air is immediately vented outside. Try to avoid using anything in the window that restricts airflow. Though it’s often necessary to use some type of screen to make sure no one can see in, try to do the best you can to obstruct airflow as little as possible. How can I set up an exhaust that looks normal from outside?

Try to keep ducting as short and straight as possible

Window Fan

It may seem simple, but if your actual room is hot, a window fan blowing air outside can be surprisingly effective. They can help keep your room a few degrees cooler which means they’ll help keep your plants cool. I sometimes call this a “No-Ducting Exhaust” but honestly it’s more like a ‘poor man’s exhaust’ if this is the only thing you’re doing to vent out heat. But that doesn’t mean it doesn’t help!

In order for a window fan to cool a room most effectively, there needs to be some sort of “intake” for cool air to get in. It’s like a bigger version of an exhaust system. A separate open window in the same room is perfect, though an open door can also help, especially if there’s an open window somewhere in the house. However, even in a completely closed room, a window fan can help keep temps down somewhat in the room because it helps vent out heat from the grow light.
Oscillating Fans

Oscillating fans are perfect for reducing “hot spots” that form in the grow space. Particularly “wing” type reflectors can cause major hot spots because the heat from the light is beaming directly down onto the plant. If it’s really hot directly under the light, using fans to blow that heat away from your plants can make a huge difference in how much heat they experience.

In addition to oscillating fans, using a strong-enough exhaust fan with a big intake hole helps keep everything moving so hot spots don’t form.

Just be aware that adding oscillating fans doesn’t bring down the overall temperature in the tent, they just move air around!

3.) Optimize your Grow Lights

There are several ways you can optimize your grow lights, up to and including upgrading to better ones!

Reduce Power

Some grow light ballasts are “dimmable” which means they have different power settings, allowing you to reduce the power of your light. For example you might be able to set your grow light to 80% or 60% power. Some also will let you set the power by choosing 400W, 600W, 1000W etc. In these modes your grow light will use less power and give off less light/heat. If there’s a heat wave coming up, it might be helpful to turn down the power until things cool down.

Raise Grow Lights

Raising your lights tends to help bring down temps experienced by the plants, especially with big CFLs and MH/HPS grow lights. Getting a lot of light can make plants more likely to suffer from heat, so another bonus of moving your lights further away can help them be more heat-resistant.

Learn more about how far away to keep grow lights from your plants.
Get a Smaller Grow Light (doesn’t necessarily mean lower yields!)

Too much heat will hurt your yields by making plants grow poorly, so having the right size light for your space is actually more important than the size of the light. In some cases, getting a smaller light can actually increase yields, especially if the heat is out of control with your current light. If you’re using a MH/HPS grow light, consider stepping down a size. For example a 250W HPS can still yield over 5 ounces, which may be enough for some people, yet runs much cooler than the 400/600/1000W variants.
Switch from CFLs to LEDs

For example, if you’re using CFLs and are dealing with too much heat, then LEDs are could be a great choice for you. This is because LEDs are much more efficient than CFLs and put out less heat for the same amount of electricity. The only possible downside is you need to have extra height for LEDs because an LED panel needs to be kept at least 16-18” above the tops of your plants for the best results, while CFLs can be kept just inches away. Learn more about CFLs vs LEDs.

Switch from HPS to LEDs

Although LED grow lights don’t necessarily get bigger yields/watt than an HPS grow light, they tend to come in smaller sizes and have built-in heat sinks and fans to blow hot air up and away from the plants. This can make a big difference as far as how much heat is being felt by your plants. Just know that if you switch from a 600W HPS to an LED grow light that pulls 600W out the wall, that the amount of heat they put out is about the same – it just gets distributed differently.

LED grow lights are more suited for a situation where you can’t really have an exhaust, and they can just be plugged in and hung above your plants. However, if you have the ability to vent out hot air with an exhaust fan you may want to go with MH/HPS because they come with air-cooled hoods that give you great control over the temperature, and produce great yields with dense buds. Learn more about HPS vs LEDs.

4.) Change Your Light Schedule

Opt for 18/6 Light Schedule in the Vegetative Stage

Many growers give their plants 24 hours of light a day in the vegetative stage, and although this results in the fastest growth, having the grow light off for several hours each day will dramatically help keep the temperature down.

Although plants may grow slightly slower under this light schedule, 18/6 is a common choice for growing cannabis in the vegetative stage and here’s why: Although you want to maximize how much light you’re giving your plant, giving as much as possible doesn’t necessarily give the best results.

Many growers believe (myself included) that you get diminishing returns after 18 hours of light a day. Although plants do grow faster if they’re getting more than 18 hours of light a day, I don’t believe the increase in growth is big enough to justify the extra electricity and heat. In my experience, cannabis plants benefit from having a night stage that helps make up for the lack of extra light, so that the difference between 18/6 and 24/0 isn’t very noticeable. However, the reducing your lights-on hours can make a huge difference on your electricity bill and the temps in your grow space! I’ve grown many plants on both 18/6 and 24/0 schedules before, and didn’t notice much difference between the two.

Learn more about cannabis light schedules here
Set “Off” Time for Grow Lights for the Hottest Part of the Day

This is a super simple solution to help control the heat for growers who get high temperatures in the middle of the day! Have your lights set to turn off during the hottest 6 hours of the day and you’re done!

5.) Start with a Heat-Resistant Strain

Some strains are inherently more resistant to heat than others. For example strains that originated from the equatorial region, including many Sativa and Haze strains, can resist much higher temperatures than strains that originated in colder regions, such as many Indica strains.

  • Choose a Sativa or Haze Strain
  • Avoid Indica Strains
  • Avoid Auto-flowering Strains – The ancestor of all auto-flowering strains is a type of wild hemp known as Ruderalis. This plant originated from Siberia which is very cold for most of the year. Because of this part of their ancestry, many auto-flowering strains tend to be less resistant to heat, especially if they’re mixed with a lot of Indica strains.

If you’re looking at a Sativa or Haze strain, you’re already getting something that’s inherently much more heat resistant, but here’s a strain I know to be extremely heat resistant, easy to grow and potent:

Kaya Gold

  • In addition to doing well in the heat, this strain is overall easy-to-grow and resistant to pests and mold
  • Has a surprisingly short flowering stage (8-9 weeks) for a Sativa-dominant strain, and doesn’t get too tall
  • Buds produce very heavy effects – more of a brain-melter with couchlock than a good choice for social situations
  • Does well indoors, and also grows exceptionally well outdoors (plus it is ready to harvest earlier than most other strains)
  • Great yields
  • Get Kaya Gold from Nirvana (ships to US)

Check out an LED grow journal featuring Kaya Gold

If you have experience with a great heat-resistant cannabis strain, please contact us!

Most importantly, take extra good care of heat-stressed plants – try to baby them as best you can!

5 Secrets to Controlling Heat Indoors Table of Contents Controlling heat in the grow room is one aspect of growing marijuana indoors that can be difficult for many of us growers. Grow lights