Can You Smoke Marijuana Leaves?
The question about “Can You Smoke Marijuana Leaves?” is often answered differently by different smokers. Normally, growers cultivate marijuana to obtain their high-quality buds for smoking. However, you can still do a lot of things with other parts of the plants. For example, you can roll a joint with the leaves of Marijuana.
First off, for curious smokers/users who are interested in knowing whether you can smoke cannabis leaves, Yes! It can be smoked; it was done in the past. However, it didn’t result in a customer’s satisfaction as it did not pose a high concentration of THC.
How is marijuana leaves different from the buds?
Buds were quick to gain notoriety for their staggering THC contents; by this, the leaves have faded into the abyss. However, there are weed leaves that can still be useful, a lot of people in today’s generation mash these leaves up and add them to the mixture that was obtained from the buds, in a Hookah or a Pipe. marijuana leaves can also be a decent substitute if you happen to run out of Cannabis.
For some people, they are not willing to add leaves in their marijuana, as it changes the flavors and texture of the smoke. Others prefer tobacco to add some spice to their flavors. Some people also don’t like smoking the leaves because they give headaches, so it is with the best interest to have them mashed and mixed with other marijuana strains.
Also, it should be noted that not all marijuana leaves can be smoked. In fact, users must avoid the largest leaves. Growers often use fertilizers when cultivating marijuana plants, when leaves are treated, they contain the highest amount of chemicals in it.
However, to put things on a clear note, Yes, the cannabis fan leaves can be smoked. For people still asking can you smoke cannabis leaves, here are some guidelines on why you can.
Cannabinoids are all over the plant!
Aside from the inside of the roots and stems, the Cannabis plant also has cannabinoids all over the plant. This is because the resin glands are all over the plant. However. Even if leaves are contained with cannabinoids, they boast only small traces of THC and CBD contents.
Also, there are different kinds of leaves in the cannabis plant. Everyone who takes a closer look at the buds should have a good understanding that they contain a large part of trichome-sparkled leaves. However, the leaves that surround the buds should not be put in the same category as the big-fan leaves when you factor in the amount of THC and CBD.
You need big amounts!
As was said earlier, marijuana leaves contain small traces of CBD and THC, so if you are looking to smoke them, make sure to have plenty. In general, weed leaves contain about 0% to .4% of CBD and THC, so a handful of them might not do the trick.
But if you happen to trim your leaves that stand out from the buds before it was harvested, you could see clearly that there are THC trichomes that are visible to the eye.
So, to sum it up, there is a varied range of marijuana leaves. However, all of these leaves vary from strain to strain, and each respective strain offers different contents of THC and CBD. So, they all differ from cannabinoid profiles.
Therefore, it is hard to say how high you can get from smoking marijuana leaves. Plus, your tolerance to its effects also plays a major role!
What are the types of marijuana leaves you can smoke?
Not all leaves are created of the same quality. As we said earlier, they vary from marijuana strains to another. However, all types of leaves a marijuana plant contains viable benefit for the entire plant. But if you really want to smoke marijuana leaves, it is important which type is best suited for smoking.
They are usually found near the buds. This is the good part other than the buds. They are relatively small when compared to other types. They were named Sugar leaves because they are usually concealed in trichomes giving them a sugary white coat appearance, and these trichomes have THC.
I associate leave trimmings to sugar leaves because trimmings are just plain cuttings of the leaves that are added to sugar leaves. They are cut-off leaves that are also near to the buds. So, rather than cutting the entire leaves, you just simply trim it and add it to your sugar leaves mixture.
Both Sugar leaves and trimmings can possess THC because they are covered with trichomes. Although it will not give you an overpowering high as the buds do, they can certainly get the job done.
While sugar leaves are closer to the buds, the fan leaves grow the farthest to the buds. These leaves play a pivotal role in soaking up plenty of sunlight and other nutrients for your marijuana plant to grow. However, they don’t contain as much THC content as the sugar leaves do.
However, some fan leaves may contain high amounts of THC, so it is best to have it a try. Check the stems whether they contain trichomes; stems sometimes contain trichomes too. In the end, if you are really looking to get high, we highly advised that you take the Sugar leaves/trimmings route. It would just take a large number of leaves before you even get light headed, let alone be high.
Are there other alternative options?
If you are just looking for ways to get high, and smoking cannabis leaves isn’t your best choice. We’ve listed some options that may able to get you high.
Cannabis is edibles quickly gaining popularity; however – there is a downside when taking cannabis edibles orally when you ingest cannabis edibles orally; it will not be transported directly to your endocannabinoid system but by the liver.
When cannabinoids are absorbed by the liver, they only amount to a small proportion. This means that little amounts are only being absorbed; thus, eating cannabis might not sound good at all.
When you are just about to toss away your marijuana leaves, pause for a moment, those are still valuable leaves in large amounts. As was said earlier, they only amount to small portions, but if you have a large number of leaves, those little portions could result in one big serving.
A good way to deal with those little amounts of marijuana leaves is to extract them. There are tons of ways on how to extract them, but the safest and easiest way is having them extracted in an Ice-O-later hash maker. With this equipment, you could extract only the trichomes that are sticking in the leaves of the stem.
Although the extracted amount is little when compared to regular buds, there is still something to be added, right? Doing it won’t hurt you anyways. Can you smoke marijuana leaves should be answered by you, there are many alternatives out there that maximize its uses. It is up to you and your imagination!
The answer to the question, Can you Smoke Marijuana leaves is already up there. I hope we helped answer your curiosity. There are plenty of ways how to use them, and sometimes, it is up to us to make the most out of everything we have! A curious mind will go a long way!
Are marijuana leaves good for smoking? Satisfy your curiosity with the answer to the secret of smoked cannabis leaves.
MARIJUANA LEAVES, CANNABIS
We’re going to talk about the usage of marijuana leaves. Many questions around: when do I have to cut marijuana leaves? How are they structured? How many types? Where to be kept? Where and how to dry them? What to do with marijuana leaves? What if you smoke marijuana leaves? What do they contain? Why do marijuana leaves turn yellow? Why do they get folded down? Why do cannabis leaves fall down or get rolled up? How to provide smoking marijuana leaves? How to cook marijuana leaves?
Well, following up, simple and plain. In fact, once read, your view on marijuana leaves will have totally changed. You won’t throw away your marijuana leaves anymore and, if you do, you’ll be conscious on their multiple options you didn’t know.
Generally, the leave’s a vegetative organ which appears in vascular plants, and its main function’s photosynthesis. Apart from typical leaves or nomofiles, plants also produce other types of leaves with different forms and functions, like profiles, bracteas and antofiles. But, what about marijuana leaves?
Firstly, marijuana leave is cannabis symbol. Although growers tend to look for their buds and ignore what marijuana leaves can offer, these were, are and will be the most recognizable and representative marijuana visual symbol. When thinking about marijuana, we visualize that famous silhouette, drawn and represented worldwide. Marijuana leave’s the universal symbol of this plant, and, following up, we’re going to explain everything about this famous, although unknown, leave.
- 1 Structure, parts and shape of marijuana leaves
- 2 Parts of marijuana leaves
- 3 What’s its structure?
- 4 How many marijuana leaves can we find?
- 4.1 Sativa:
- 5 Índica:
- 5.1 Ruderalis:
- 6 Marijuana leave morphology
- 7 Types of cannabis mutations
- 7.1 Australian Bastard Cannabis (abc):
- 7.2 Buds in the leaves:
- 7.3 Viny cannabis:
- 7.4 Albinism and variegation:
- 7.5 What to do with marijuana leaves?
- 8 Where and how to dry marijuana leaves
- 9 Different usage of marijuana
- 9.1 – Resin and hash
- 9.2 -Cooking with marijuana leaves.
- 9.3 -Infusions
- 9.4 – Marijuana cosmetics.
Structure, parts and shape of marijuana leaves
Concerning its structure and parts, marijuana leave is quiet similar to the rest of vegetal leaves. Firstly, we are going to define every part of the structure of marijuana leave and, then, describe how they are assembled to each other, that is, how the structure of the leave is assembled.
Parts of marijuana leaves
Generally, every marijuana leave has the following parts:
- Pod: tender and long covering, in which certain plant seeds are in-line enclosed (not with marijuana), formed by two pieces or valves.
- Petiole: appendix of the leave of a plant through which it’s used to the stem.
- Raquis: axis of a spike or feather from which limbos and leaflet appear.
- Limbo: wide part of plant leaves.
- Leaflet or nerve: every separated piece into which a leave limbo’s occasionally divided.
- Vascular system: it’s formed by all the veins along leafy limbo, by means of major or minor venation.
- Underside: lower leave face, opposite to beam.
- Beam: upper face or adaxial face of the limbo of a plant leaf. Differently to underside, it doesn’t tend to have any stomas; it has a slightly gross cuticle, and less trichomes. Its color tends to be darker than underside color.
What’s its structure?
First of all, pod comes from the main stem or primary raquis of the plant, the first part of the structure of the leave. Petiole comes from pod, the appendix which joins the leaf with the pod and, this way, with the plant stem. Raquis is opposite to petiole, axis from which leaflets are born.
Leaflet separates the limbo from the leave, that is, the limbo axis. When the leave’s simple, leafy limbo’s formed by a single leaflet, so a leaflet’s similar to a leave. Leaflets form several coverings, and they finish in the root. Lastly, vascular system’s like a vein, along the leafy limbo. All these parts compose the leafy morphology of marijuana plants.
Besides, marijuana leaves are decused, that is, a couple of opposite leaves grow perpendicularly to the previous pair, forming crosses from top to bottom. Sometimes, when the plants grow and evolve, almost flourishing, the morphological pattern of the leaves can change; for instance, revegetated plants change their pattern, and their leaves show an alternative philotaxy, so they change their disposition regarding the plant stem, settling one by one and forming a single plane.
How many marijuana leaves can we find?
Mainly, we can find three types, or subspecies, of marijuana leaves, with different morphological characteristics: sativa, indica and ruderalis.
You can have a look at the following article:
long leave, narrow, light, with pointed and irregular edges, usually green. The biggest plant leaves, mainly sativa, have more than thirteen leaflets.
wide leaves, bigger, with about nine leaflets, strong olive green.
not a real species, similar to a subspecies; very small, abundant leaves, because it’s a subspecies which depends on climatic outdoor patterns. It appeared in Russia, so arid and cold weather made its morphology. Besides, it’s much more resistant to bad weather; the trunk’s robust and fluffy, and the foliage’s wide and light green.
Marijuana leave morphology
Marijuana leave morphology’s very varied, depending on different genetic mutations.
Types of cannabis mutations
Whorly phyllotaxy: mutation producing three leaves from each node, instead of two. Besides, an additional branch’s generated in every node, so the plant keeps on growing like a bush.
Ducksfoot: mutation producing palm-shaped wide leaves; they look like a duck foot membrane, that is, they lose the characteristic look of a marijuana leave.
Australian Bastard Cannabis (abc):
Rare mutation, producing an odd marijuana leave. The leaves haven’t any jagged edges because they’re plain, and the leaflets are about five centimeters long. Besides, this mutation doesn’t only affect the leaves, but it changes the general structure of the plant, which stops evolving like a straight bush, and starts evolving like grass.
Buds in the leaves:
Usually, the buds appear in the nodes, where petioles are born; but there’s a rare genetic mutation which makes buds appear in the other extreme of the petiole, that is, in the very leave base.
This mutation makes the stems roll spirally, like a climber. Besides, the leaves are very different, losing the jagged shape, with fewer leaflets, smaller and rolly.
Albinism and variegation:
This mutation produces albino plants. Chlorophyll genes perform wrongly, provoking plant pigmentation wrong patterns. Then, unpigmented leaves appear, turning from green to light yellow, almost white. This is a negative mutation, because plants need chlorophyll for photosynthesis, so they need photosynthesis to survive and perform their vital processes.
What to do with marijuana leaves?
As previously mentioned, marijuana’s extremely useful. Not everybody knows marijuana leaves have a high THC percentage, with domestic, cosmetic and therapeutic usage; for any following usage, you should use manicure traces (trichome leaves closest to the buds) better than the rest of plant leaves – no resin, no proper psychoactive effect.
First of all, we have to dry the marijuana leaves, and, then, you will get surprised about their possibilities.
Where and how to dry marijuana leaves
Drying marijuana leaves is simple; you just have to hang them upside down in a dry, dark place. After a few days or weeks, depending on room humidity, the leaves will be ready to be shredded up and used. Besides, when dry and shredded, they’ll also be ready to be smoked or kept and stored in some dry dark place. A dry place’s very important, because humidity makes the leaves full of mold and fungi.
Different usage of marijuana
Following up, we can talk about different usage on the exceeding leaves of our crop.
– Resin and hash
First of all, let’s focus on the systems of resin extraction from the leaves – different extraction processes/methods/qualities are totally related to resulting product (the types of resulting hash are varied too).
Usually, the consumed hash will be dry sieved, the most common method among producers. Additionally, it can be extracted hand-rubbing, or through some modern techniques like resin separation by butane gas. This is the most popular technique, obtaining the most powerful THC percentage, almost 90%, when 15-40% is average. This technique requires the leaves close to the buds, the most impregnated by resin and trichomes; otherwise, the extraction with leaves will be impossible.
Moreover, extraction with ice and water consists of leaving the leaves or buds in water, so vegetal material stays surfacing while the trichomes go to the bottom, allowing us to produce our hash.
-Cooking with marijuana leaves.
Many recipes can be made with leftover crop leaves – with dry leaves, we can cook muffins, infusions, brownies, cookies or butter; our blog provides several post with the necessary steps and ingredients for these recipes:
We’re going to talk about the usage of marijuana leaves. Many questions around: when do I have to cut marijuana leaves? How are they structured? How many …