Categories
BLOG

how deep do i plant pot seeds

The complete guide to germinating cannabis seeds

Before you can be met with bountiful hauls of dank buds, there are several stages of cannabis growing that take precedence. Unless you can successfully germinate cannabis seeds, you won’t have a plant to harvest. Give your seeds the best possible start in life by reading our definitive guide to germination.

Contents:

THE ART OF GERMINATING CANNABIS SEEDS

Often overlooked, it is all too easy to assume that the vegetative and flowering stages of cannabis growth are the most critical parts of the plant’s life cycle. However, with the chance of failure high unless you know what you’re doing, poor planning when it comes to germination can make or break your next grow. Giving your cannabis seeds the best possible start on their journey to bulging buds is a surefire way to encourage a healthy and robust plant.

Small, fragile, and in desperate need of a helping hand, there are several ways you can germinate your cannabis seeds. All methods have varying degrees of success, with both advantages and disadvantages. It is important to note that even with advanced growing expertise and top-of-the-line equipment, you may still end up with a few failed seeds. This is a natural part of dealing with a living organism. At Royal Queen seeds, we only sell feminized cannabis seeds, so there is no need to worry about removing male plants.

WHAT TO LOOK OUT FOR IN CANNABIS SEEDS

Regardless of where you get your seeds from, it is best to give them a slight (and delicate) inspection before planting. Most of the time, all seeds will germinate; however, poor-quality seeds will produce a weaker plant. Unfortunately, that is something you will not find out until well into the vegetative and flowering stages.

To avoid disappointment, seeds that have a darker colouration stand a better chance of germinating, while pale green or white seeds are likely to fail. Even if dark seeds look slightly damaged, they should be planted anyway. There is a good chance they will still germinate, even if the outer shell is somewhat crushed.

GERMINATION TEMPERATURE PLAYS A CRUCIAL ROLE

Before we jump straight into the germination methods, there are a couple of germination golden rules. For the best results, we recommend staying within these guidelines, no matter how you choose to germinate. That being said, of all the factors to consider, temperature is one of the most critical. Seeds will always seek out even the smallest amount of moisture, but they use temperature as a sign that they need to do so.

• The ideal temperature is between 22° and 25°C (71–77°F)
• Your growing environment should be damp/moist, but never wet
• Relative humidity range should be between 70% and 90%
• Seeds favour fluorescent lighting (Cool White code 33)
• Minimise the amount of seed handling you do
• In hydroponic/rockwool plugs, the ideal PH value is 5.8–6.2

WHAT IS AN EXPECTED GERMINATION TIME?

Three fundamental principles will trigger that first small taproot to appear: warmth, moisture, and darkness. With the promise of moisture, a single root will take shape before slowly developing into the cannabis plant we know and love. In the right conditions, seeds will begin to develop within 12–36 hours of moisture being introduced to them.

Timescales can vary, as it all depends on how ideal your germination environment is (see the golden rules above). Even the worst grower could make a seed germinate, but it may take a few weeks and, of course, increases the risk of a weaker plant.

CHOOSING YOUR GERMINATION METHOD

GLASS OF WATER APPROACH

Arguably one of the least effective methods, but it is still viable. Incredibly simple to facilitate, beginner growers may opt to germinate their seeds in a glass of water. Half-fill a glass or bowl with water that is approximately 22°C (71°F).

After 3–5 days, the seeds will start to open, and you should see tiny white tips appear. Once these roots reach 2–3mm in length, use extreme care to transfer them from the water to pre-prepared soil pots.

The soil pots will need small holes (roughly 10–15mm deep) for the newly germinated seeds to be placed into. Once the seeds are secure, you will want to place a fluorescent light 13–15cm (5–6 inches) away to encourage growth. Finally, don’t risk overwatering your seeds at this early stage. Use a plant mister to make sure they stay damp but not soaking wet.

WET KITCHEN TOWEL METHOD

Probably one of the most common methods of germination. The kitchen towel method comes in several iterations. Some growers use cotton wool pads or absorbent pieces of paper. For this guide, we will be using kitchen towel as it is readily available and holds moisture relatively well.

Place one sheet of damp kitchen towel on a flat surface. Space your seeds a few centimetres apart before placing the second piece of kitchen towel over the top. You need to ensure both pieces are damp, not wet. Once again, when the white root tips reach 2–3mm, move the seeds (carefully) to soil pots. Use the same guidance found above for planting techniques.

PLANTING DIRECTLY INTO SOIL

Planting directly into your growing medium prevents having to move seeds when they are at their most fragile. That first root tip is covered with microscopic filaments that are easily damaged. Given that both a cup full of water and moist paper towels are more prone to temperature fluctuations from their environment, planting in soil is a much safer option.

Start by filling pots with a premium-quality soil that has been soaked in water. Many growers also choose to lace the water with a root stimulator. Make a hole roughly 10–15mm deep. This will be your seed’s new home. Remove the seeds from their packet and place them into the pre-dug holes. Loosely cover the seeds, but be careful not to compress the soil above the seed too much. The root will struggle to penetrate solid soil, slowing plant growth. Lightly spray the top of where you placed the seed so that your growing medium stays moist.

If you don’t like the idea of pre-soaking your soil, you can use a spray to moisten the holes before you plant each seed. With enough moisture surrounding your seeds, you can still encourage a root to develop.

Your growing pots will need to be placed in a damp climate that is within the temperature range listed under our golden rules. After 4–10 days, you should see a young seedling sprout, while the roots will have begun to develop underneath the soil. The entire plant and its soil can now be transferred to a larger pot, where normal growing routines should start.

USING STONE WOOL BLOCKS

Maintaining the ideal temperature (between 22–25°C/71–77°F) and moisture for germination is tricky. Leaving seeds out in the open environment or on a windowsill is far from ideal; a DIY climate-controlled cupboard would do a much better service. A warming mat is perfect for maintaining a constant temperature, but it doesn’t tackle the issue of moisture.

You will need to invest in a few pieces of unique equipment, but by using stone wool blocks, you can create a perfect utopia for germinating cannabis seeds. Soak the stone wool blocks in the same way you would a soil medium. The wool will retain the moisture and prevent the need to water during the early stages of germination. After the wool blocks are soaked, stick them in a plastic tray that also has a lid. Large cake tubs are ideal.

The dome of the plastic container will create your seeds’ own mini tropical climate. If you then place all the components in a temperature-controlled cupboard, you will have created a self-perpetuating supply of moisture—no need to touch the seeds again until they are ready to be transferred to your final growing medium as a young seedling. Using the stone wool block method, your seeds should germinate in one to two days.

Two or three weeks after germination, your young seedlings should be ready for their new home. At this point you have two options; transplanting them into soil pots, or taking on the challenge of hydroponics. You’ll know when the seedlings are ready to be moved because the root system should start to poke out of the bottom of the wool blocks. As long as the roots haven’t begun to engulf the bottom half of the wool block, they will seek out water and nutrients in their new surroundings and continue to grow downwards.

ROYAL QUEEN SEEDS FEMINIZED STARTER KIT

There is, of course, a far simpler way to germinate seeds. Ideal for beginners, the feminized starter kit by Royal Queen Seeds has everything you need to kick-start your next cannabis project.

The Royal Queen Seeds Feminized Starter Kit contains:

  • 3x RQS Critical feminized seeds
  • 20x Easy-Start seedling pots
  • 1x Propagator Pro
  • 1x pack of Bacto
  • 1x perlite
  • 1x fluorescent lights
  • 1x instruction manual
  • 4x AA batteries
  • 1x Royal Queen Seeds catalogue

*You will also need a measuring cup and a stirrer (not included in the kit).

1. Gently remove the foil from the back of the seed packet and place them carefully into a dry container.

2. You will need a shallow container that is large enough to accommodate the seed tray. Fill the container with one litre of lukewarm water (22–25°C/71–77°F). Pour in the packet of Bacto enzyme, allowing it to dissolve before setting the seed tray into the container to soak. The seed tray only needs to be immersed for 5–10 seconds. Do not discard the Bacto mixture after the seed tray has been soaked.

3. After removing the seed tray from your shallow container, poke a 10–15mm deep hole into the soil of each pot, and delicately transfer your seeds from their dry container into each hole. Remember, one seed per pot.

4. Using the supplied propagator, sprinkle a 15mm-thick layer of perlite into the bottom of the tray.

5. Place your seed tray into the propagator, adjust the walls, and position the lid. The lid comes with an on/off switch for the already-attached lights.

6. Check the water level in your reservoir once a day. Your aim is to maintain an even level. After 1–7 days, the seeds should have sprouted, with visible leaves appearing. Once the seedling is 3mm tall, transfer it to your final growing medium.

IF IN DOUBT, THINK SPRINGTIME CONDITIONS

No matter which method you choose, always think about what conditions would naturally be like in spring. In their natural environment, cannabis seeds would start to sprout in-line with the seasonal change from winter to spring. Moisture is still high, and temperatures will be naturally rising. Always ask yourself the question, “Does my germination setup replicate spring conditions”. If the answer is yes, there is a good chance germination will be a success.

GIVING YOUR SEEDS THE BEST POSSIBLE START IN LIFE

In most cases, germination will go off without a hitch. However, there are a few troubleshooting issues we can help with.

LIGHTING

The first is lighting. Your seed/young seedling will only need fluorescent or CFL grow lights, at least to begin with. While plants need light to thrive, too much of a good thing will damage cannabis in its first few weeks.

Position lights about 15cm from seeds. Once your seedling has developed its first proper leaves (they will have jagged edges), you can move the lights as close as 5cm. If you are concerned about damaging your seedling, place your hand between the leaves and your lights. If you cannot hold your hand in place for ten seconds without it being too hot, move the lights 2cm away. Repeat until you are comfortable with the temperature.

As young seedlings grow quite quickly, you will need to keep adjusting lights to get the best results. After two weeks under fluorescent lights, you will be able to switch to high-powered HPS or MH-style grow lights.

UPSIDE-DOWN SEEDS

Don’t panic, where possible roots will always grow downwards. It is not necessary to try and reposition the seed yourself. Disturbing the seed at this crucial time will do more damage than good. In most scenarios, what you are actually seeing is not a root protruding from the top of the seed, but the stem of a cannabis plant.

If you are ever unsure, always wait a few days for the first leaves (cotyledons) to appear. As long as a seed’s requirements have been met, the seedling should sort itself out. The best approach is not to panic; follow the golden rules and your young seedling will be ready to transfer to a larger pot in no time.

GERMINATION AND BEYOND

WHEN DO YOU START FEEDING?

It will depend on the growing medium you are using, but in most cases, you will not need to supply any nutrients for the first 2–3 weeks. There will be of plenty of nutrients available in the soil, and even coco will only need nutrients added after a week or so. If you do opt for coco or hydroponics, nutrients should be added at 0.25x their regular strength. Once the first set of leaves appear, increase this in increments of 0.25 per set of leaves. For beginners, we would always recommend using a soil medium. It allows you to get to know the intricacies of growing cannabis more efficiently, and can be the least punishing if you make mistakes.

An easy way to spot if more nutrients are needed is to observe the leaves. The serrated leaves will start to turn pale green as nutrient stores are depleted. Left long enough, leaves will eventually turn yellow. This is a definite sign that more nutrients are needed. Your plant will not die if the leaves turn yellow, but it is a timely reminder to feed your young seedling.

Nitrogen is the most commonly needed nutrient during periods of high growth. Once the seedling has been fed, the colour of the leaves will return to normal. Depending on how long you waited to take action, this can take a few hours or a whole day.

SIT BACK AND RELAX

The first few weeks of a seedling’s development require very little interference. Nutrients, as we have mentioned, will need minor tweaks, as will lighting. However, now that your seed has germinated, you have a few weeks of grace. Sit back, relax, and enjoy your cannabis plant taking shape.

Once those initial weeks have passed, you can treat your seedling like it is in the vegetative stage, and switch to strict lighting routines and full-intensity light. During germination, always remember the golden rules, and if in doubt, ask yourself if you have created “springtime conditions”. If you are confident everything is on track, all you need to do is observe and marvel at the creation of your very own cannabis plant.

Royal Queen Seeds Produces Some Of Europe’s Best Cannabis Seeds, Ensuring Hobby Growers Everywhere Have Access To The Finest Marijuana Strains Around.

Royal Queen Seeds Produces Some Of Europe’s Best Cannabis Seeds, Ensuring Hobby Growers Everywhere Have Access To The Finest Marijuana Strains Around.

Part. 2: The Vegetative Phase. The germinated seeds peak out above ground and immediately spring up.

Part. 3: The Cannabis Blooming Phase. Just another couple of months of blossoming we will be ready to get our sheers out of the cupboard.

Part. 4: The last weeks of flowering stage. After weeks of mounting excitement the long-awaited moment the harvest is finally within arm’s reach.

Part. 5: Harvest Time. Learn every step of the cannabis harvest and post-harvest process.

Time then to whip out our packages of seeds and get to work. But how do you best set to work, to get these tiny, fragile seeds to grow without problems into small plants?

How do I germinate marijuana seeds?

Table of Contents

Introduction: Cannabis Seed Germination

Cannabis germination is the process of getting your seeds to sprout, and you know sprouting has occurred when a little white tendril pops out of the seed.

The little white tendril that emerges from a cannabis seed during germination is your plant’s first root, known as a “taproot.” All other roots made by your cannabis plant in its lifetime will sprout from the taproot.

The taproot – and maybe a few tiny early offshoots of the taproot – will get longer and longer, pushing the seed up, and after the shell breaks through the surface of your growing medium, the first leaves (these first round leaves are known as “cotyledons”) will emerge from inside the cannabis seed.

The cotyledons were already created as part of the plant embryo in the seed itself, so the cannabis seedling doesn’t have to grow them. In fact, the emerging first leaves are what break apart the shell after it’s cracked open by the taproot, as pictured here.

The next set of leaves after the cotyledons are your plants first “true” leaves and will have jagged edges (serrations). At least, they are the first leaves that your seedling cannabis plant has grown all on its own, unlike the cotyledons which were already formed in the seed.

Cannabis seeds can be expensive, don’t waste your seeds with bad germination methods!
(Wait, where can I get cannabis seeds?)

What Do Marijuana Seeds Need to Germinate?

Marijuana seeds need the following to get the best germination rates:

  • Moisture – Keep things moist but not soaking (you can soak hard seeds for up to 24-32 hours, but do not leave seeds soaking in water for longer than that).
  • Peace – Seeds need to be left alone while you’re waiting for the taproot to show up.
  • Warmth – Keep things warm to get the best germination rates, but not too hot! Think springtime. Seeds can definitely germinate in cooler temps, but germination tends to take longer when it’s cool.
  • Gentle – Be careful when checking seeds, and treat them gently when you have to move them. Avoid touching their white root if possible; the taproot is very fragile and easily snaps off!
  • Plant Root Down – When planting germinated seeds, point the white root downwards into the growing medium to prevent the seedling from having to reorient itself.
  • Plant Knuckle Deep – When planting germinated seeds, they don’t have to be placed too far under in the growing medium, about a half inch to an inch (1.3 cm – 2.5 cm) down from the surface of the medium should be enough.

When germinating cannabis seeds, think springtime conditions. In the wild, your cannabis seeds would germinate in the spring so they can be ready to take full advantage of long summer days!

Never let your young sprouted seeds dry up!

The main signal that tells a marijuana seed to start sprouting is the presence of moisture and heat. The combination of warm and wet (aka spring conditions) “tells” the seed to start burrowing their main root (called a taproot) through their shell.

If a seed’s root breaks through the shell and the water around has dried up, your seedling will die. Plain and simple.

Seedlings are fragile at first. Once sprouted, the roots need to stay constantly moist to stay happy and healthy. It’s important to make sure the seeds have access to water the entire time during germination, no matter which cannabis germination method you end up using.

Keep things warm!

Seeds germinate best in warmer temperatures and young marijuana seedlings do better with higher relative humidity in the air. When seedlings are young, they grow faster and healthier when they can absorb moisture from the air through their leaves while their roots are still developing. Dry air won’t kill your seedlings, but it doesn’t make things better. Again, think springtime conditions!

You can use an incandescent bulb (or two) placed over the marijuana seed germination area to help keep things warm. Incandescent bulbs are the opposite of what a grower typically wants: they can’t be used as grow lights, but they’re great at generating heat. Some people will also place a heating pad (the kind you get from a garden store for seedlings) underneath seeds to help aid germination.

Basically, you want to make sure any seeds or sprouts are kept warm and moist at all times, that their roots are unexposed to light, and that they get planted right away.

There are several different methods to germinate your cannabis seeds, and in this article we’ll go through some easy techniques that have proven to be effective.

How do I know if my seeds are good?

Assume all dark seeds are viable, even if seeds can be crushed

Generally, pale-green or white seeds will not germinate, but most dark seeds will germinate when given good conditions.

I used to believe that marijuana seeds were only “good” if they were extremely hard and very dark. One of the first tests I heard to check new cannabis seeds for viability was to try to crush them between my fingers. If the seeds could be crushed, they weren’t good, or so I was told. This has proven to be absolutely terrible advice!

Some of the best plants I have ever grown have emerged from seeds which were flimsy and could be crushed between my fingers. As long as you provide great marijuana germination conditions (as explained above), I’ve found that a lot of seemingly “weak” seeds germinate and produce amazingly hardy plants and great buds.

I do not believe the health of the plant is directly tied to the apparent “health” of the seed. If the seed germinates, it’s a good seed!

Here’s a picture showing several healthy and viable cannabis seeds

Remember! Most of the medical strains of marijuana we grow today (learn how to get seeds) have been bred over many years to produce plants that are easy to grow and which produce potent, medicinal buds. However, these strains have not been selected for the toughness of the seeds they produce since that isn’t important to us as growers. Just remember…

As long as a seed germinates, it’s a good seed!

Germination Method 1: Starter Cubes & Seedling Plugs (Recommended)

One of the best cannabis germination methods is to use specifically-made starter cubes and seedling plugs. These plugs make cannabis germination easy. You simply place the seed in the cube or plug, add water as directed, and seedlings automatically get the perfect conditions for germination.

Each cube or plug already has a hole specifically for you to place your seed. Just stick your seed into the precut hole and pinch the top closed a bit with your fingers. Don’t worry, you can’t mess this part up 🙂 As long as the seed makes it in there, you should be good.

This is one of the easiest germination methods and doesn’t leave a lot of room for error. Cannabis seeds and clones can be expensive, and sometimes we have genetics we just can’t afford to lose. When that’s the case, germinate your cannabis with one of the following recommended options to ensure as close to 100% germination rate as possible.

Which Starter Cubes Work Best for Germinating Cannabis?

Rapid Rooters (Highly Recommended For All Setups)

Rapid Rooters are easy to work with – you just stick your cannabis seed in the Rapid Rooter (pointy side down), keep your seed warm and slightly moist, and let the Rapid Rooter do its magic.

Sprouts emerge and roots appear in just a few days.

Rapid Rooter starter cubes are suitable for all growing methods, including hydroponics, coco coir and soil. They work for every setup and come from General Hydroponics, a trusted company (the same one used by NASA) which is known for the quality and consistency of its products.

I highly recommend using Rapid Rooters over any other starter plugs. They are less prone to problems and work great with any growing medium (including hydroponic systems).

Pros of Rapid Rooters

  • Easy to Use – You Can’t Really Mess Up
  • No Prep or Setup – Open the Package and Go
  • Some of the Best Germination Rates of Any Method

Cons of Rapid Rooters

  • Can only get 50+ at a time (General Hydroponics currently does not offer fewer plugs per package)
  • After opening the package, you only have a week or two before they dry out, so if you’re only germinating one or two seeds, you’ll end up having to throw many of the Rapid Rooters away.

There are a few different options for Rapid Rooters, which can be confusing if you’re not sure what you want. The 3 different options for Rapid Rooters are listed here…

Bag of Rapid Rooters

These are round on bottom instead of being a cube, which means they cannot stand up on their own. These are best suited to a hydroponic setup where the Rapid Rooter will be placed directly in the final destination. In our hydroponic setups, we’ve had near 100% germination rates with Rapid Rooters, better than any other seedling cube we’ve tried.

  • Round on bottom (won’t stand up by themselves without support) unless you squish the bottom so it’s flat like this grower did (pic)
  • Great for starting with Rapid Rooter directly in final destination (hydro, soil, coco coir, etc)
  • Get 50 Rapid Rooters at a time

Rapid Rooters Mat

This type of Rapid Rooters comes in a mat of (usually 98) Rapid Rooters. All the individual Rapid Rooters are sectioned off and have a hole for the seed, but they must be cut or pulled away from the complete mat. Unlike the type of Rapid Rooters that comes in a bag, these ones are made into cubes and are flat on the bottom so they can stand alone. This makes them good for germinating in a shallow pool of water where the cubes need to be able to stand up on their own.

  • Easily break cubes off the mat (already sectioned off with pre-cut holes)
  • Already shaped like cubes with flat bottoms, so they easily stand up by themselves
  • Good for seamlessly transplanting your seedlings somewhere else
  • Get 98 Rapid Rooters at a time

Rapid Rooters Tray

The Rapid Rooters tray is perfect for seeds or clones. Allow your young plants to sit in the tray with water until their roots are well formed and ready to be transplanted to your final destination. The standard size tray fits most humidity domes. You can refill the tray with Rapid Rooters from the bag or mat.

As you can see in the pictures below, the Rapid Rooter Tray comes packaged up. Once you open the package, you will see 50 Rapid Rooters already set in the tray. The resting place for each Rapid Rooter has a hole on the bottom so water within the tray is wicked up. The top part comes apart from the bottom.

Just add you seeds and pour some water into the tray – the Rapid Rooters will do everything else for you.

  • Perfect for cloning or starting seeds with a humidity dome (standard 10-inch by 20-inch dome like this one – 7-inch height recommended for cannabis seeds or clones)
  • Easy to transplant to new destination
  • Just add water and seeds, that’s it!
  • Whole tray can be refilled with any type of Rapid Rooters (from bag or mat)
  • Comes with 50 Rapid Rooters, ready to go

Rockwool Cubes (Not Recommended)

It’s often hydroponic cannabis growers who use Rockwool cubes since these can be safely placed in hydroponic setups, hold a lot of moisture, and are resistant to mold. Rockwool is cheap and easy to find. It comes in convenient cubes. But it does have some major drawbacks…

Pros of Rockwool

  • Cheap & Easy to Find
  • Inert Medium (useful for hydroponic growers)

Cons of Rockwool

  • Bad for the environment (unnatural material that does not break down)
  • Bad for your health (especially your lungs) – wear gloves and cover your mouth/eyes when handling Rockwool
  • Has a pH that is too high for cannabis, so it must be thoroughly rinsed and treated
  • Poor cloning and germination rates
  • Difficult for new growers

Rockwool cubes are bad for the environment

Rockwool is not a natural material – it’s made by heating rock and chalk to 3,000°F and air is blown through the mixture to create thin fibers of rocky material

It does not break down naturally and therefore after Rockwool is created, it will remain in that form basically forever, filling up landfills without breaking down for thousands of years.

Rockwool cubes can be bad for your health

Rockwool is dusty and needs to be rinsed thoroughly before use. Little pieces of Rockwool and dust can easily get in your eyes, skin and mouth. Small strands or fibers can get lodged in your lungs if you breathe in Rockwool dust, and it’s unknown if these fibers can ever get out again.

Protect yourself! Always use a mask, goggles and gloves when working with Rockwool.

Rockwool cubes have a high pH until they’re treated

New Rockwool cubes have a high pH – too high for healthy cannabis seed germination. Therefore it’s important to thoroughly rinse Rockwool cubes in pHed water, then let them soak in pHed water overnight before use. Since Rockwool holds onto a lot of water, after soaking they should be given a few days to dry out before planting seeds or making clones.

Rockwool cubes do not get great germination rates

Rockwool can be difficult to germinate marijuana seeds in, so I recommend most beginner growers sprout their seeds using another method like Rapid Rooters (mentioned above) which can also be used in hydroponic applications but are less prone to germination problems.

Many growers have placed seeds in Rockwool cubes, only to wait for weeks and never see seedlings appear.

Some growers seem to have no problems, yet many other growers suffer through very poor germination rates. Some seed companies will not honor seed germination guarantees if the grower uses Rockwool because it is notoriously bad for germination.

If you do use Rockwool, it’s recommended you germinate your seeds using another method like the paper towel method, then transplant your seeds to the Rockwool cubes after roots have already appeared.

Even when following all the best practices, we just have not gotten great germination rates with Rockwool cubes, and it’s common for new seedlings not to make it. When we were using Rockwool (before we switched to Rapid Rooters), we usually lost at least 1 seed out of a batch of 6 or 8.

We also had trouble rooting clones in Rockwool. Rockwool cubes just don’t hold enough air to get plenty of oxygen to the roots, and they tend to hold onto a lot of water and get waterlogged easily. Since Rockwool can hold a lot of water, it’s prone to “drowning” seeds

I highly recommend using Rapid Rooters instead for your hydroponic application (or any grow setup), as they are much more user-friendly and tend to get far better germination rates.

Jiffy Pellets (Recommended for Soil or Coco Coir)

Jiffy Pellets are used in a similar way to Rockwool cubes, though these tend to get much better germination results. Jiffy pellets are not suitable for most hydroponic setups where the roots are grown directly in water, but Jiffy Pellets can be directly transferred into soil or coco coir.

Pros of Jiffy Pellets

  • Good Germination Rates for Soil and Coco Coir
  • Good for Cloning – read a cannabis cloning tutorial using Jiffy pellets
  • Come in dried pellets, so they can be kept for a long time

Cons of Jiffy Pellets

  • Not suitable for hydroponic setups
  • Must be soaked to expand each pellet before use

How to Use: Soak Jiffy pellets in warm water, which makes the pellets expand in size, as pictured below.

Once the compressed Jiffy pellets have expanded in warm water, gently squeeze excess water from each pellet and you’re ready to go. Treat them the same as Rapid Rooters.

Germination Method 2: Plant marijuana seeds directly in growing medium

Sometimes nature’s way is the easiest way. In nature, marijuana seedlings would sprout in soil, and they would emerge as their taproots start growing down.

As a grower, you can also plant your seeds directly in your final growing medium. This works in all growing mediums, though some can be tougher than others.

One of the biggest benefits of planting your seed directly in the growing medium is you don’t have to worry about shocking your young seedling during transplant. Because your seed is already in its final resting place, your new seedling will immediately start adjusting to the environment. Every time you transplant a sprouted seed, it can cause stress as the young plant needs to readjust its new surroundings.

  • Soil – Plant seeds a knuckle deep (0.5-1 inch OR 1.3 cm – 2.5 cm) in moist yet not soaking soil. Use a light or a heating pad to keep things warm. This is one of the easiest marijuana germination methods for beginners.
  • Coco Coir or other soilless growing mediums – Plant in a similar way to soil

Germination Method 3: Germination Station

One option for growers is to use a tool which has been specifically designed to provide optimal germination conditions like this germination station with heat mat.

You can make a DIY germination station at home by putting a plastic dome over a plate on a heating pad.

There are benefits to the professionally made germination stations as they work very well and are pretty cheap to buy.

When growers start their cannabis seedlings in a germination station, the seeds are usually germinated in a starter seedling cube.

One of the advantages of starting seeds in starter cubes is your sprouted seeds can easily be transferred right to their next growing medium or container.

I recommend Rapid Rooters as these starter cubes work great for cannabis seeds and can be used in any growing medium including hydroponics, soil, or coco coir. Other starter cubes include Jiffy Peat Pellets, and Rockwool cubes.

Once your seed has sprouted, just make a little hole in your growing medium, and place the entire pellet inside. Make sure growing medium is also moist yet not soaking, like your pellet or cube. The roots will emerge from the bottom of the cube and burrow directly into your growing medium.

Germination Method 4: Soak Marijuana Seeds in Water Overnight

Another method to germinate marijuana seeds is to soak them overnight in slightly warm water, usually done in a glass drinking cup.

This method is especially effective for seeds which have extra hard shells, or seeds which are older (more than a few years old).

The warm overnight soaking can help “wake up” older seeds.

Most viable seeds will start out floating, and then eventually sink to the bottom of your glass after a few hours of soaking.

If soaked in a clear drinking glass, you will see when the little white tap root first breaks through the shell.

Some seeds take longer than others to sprout. Especially older seeds tend to need longer to pierce through their shell. However, if seeds are left soaking too long, and haven’t yet sprouted, they can drown.

Therefore, do not leave seeds soaking in water for more than 24-32 hours.

After 24 hours, I recommend putting any still-ungerminated seeds in a warm, moist place to finish germinating.

Germination Method 5: Paper Towel Method

One way to germinate seeds is to wet a paper towel and then fold your seeds in it, then leave the paper towel in a warm place.

Use cheap paper towels! For some reason, the really cheap paper towels work best because they’re so non-porous. Seeds and their roots lay on top without getting stuck to anything. This is important! The more expensive “cloth-like” paper towels (like Viva brand) aren’t good for germination because the roots actually grow into them instead of laying on top.

If you germinate your seeds in a paper towel, there is the risk of hurting the tap root (the little white root that grows out of your seeds) when moving the sprouted seeds so make sure you are careful when you’re checking to see if the seeds sprouted.

There is also the possibility of having the towel dry out which will kill your new seeds so I recommend putting your paper towel under an upside down bowl or between two paper (or regular) plates.

Check on germinating seeds once every 12 hours or so (don’t disturb them or their roots). You can plant any seeds which have sprouted right away, or leave them for another day or two, to let the others keep up.

How to Plant Your Germinated Cannabis Seeds

After you see that your cannabis seeds have sprouted, you should plant them right away.

You don’t want to touch the little white taproot with your fingers, so either carefully move the seeds, or use tweezers. If you do touch or break the root, the seedling may still survive, but any damage to the root will definitely stunt and slow down growth right in the beginning.

Root down!

Plant seeds so that the white root faces downward, about a knuckle deep into your growing medium. The top of the seed should be just below the surface of your growing medium.

It can take anywhere from a couple of hours to a couple of days before you see the young seedling emerge from the soil or growing medium. If your marijuana seedling hasn’t sprouted from the soil within 10 days after being placed root-down, it probably isn’t going to make it 🙁 Even with the best practices and the best seeds, you will occasionally lose a seed. Many times it has nothing to do with you!

First sign of taproots. These are ready to be planted!

Rapid Rooters are nice, but not necessary. You can use them before you transfer your seedlings to their final container. The Rapid Rooter should be cut open lengthwise if you plan on using them for germinated seeds. I use big scissors.

Gently place the germinated seed inside, root down. Place the seed close to the surface so it doesn’t have far to go.

Sometimes you’ll have a taproot that is curved or bent. You don’t want to try to straighten it out! Open the Rapid Rooter you split, and lay the germinated seed down gently. The seed and root will naturally lay on the flattest side. Slowly close the Rapid Rooter, and you’ll see that the bent parts of the root will end up in the “crack” of the Rapid Rooter from where you cut to split it open from the side.

After closing a Rapid Rooter, it’s hard to tell it’s been opened. The texture of Rapid Rooters causes the seeds to stay in place and not “fall down” further into the hole once you’ve got it closed.

Sometimes the shell can get stuck on the seedling, but it will often fall off on its own. If it seems really stuck, you can help the seedling by gently removing it.

Within the first week of germinating seeds, you will notice that some seeds germinate right away and others take a little bit longer. This can be caused by a lot of things, from the age of the seed (old seeds have worse germination rates and tend to take longer) to simple chance. The amount of time does not necessarily have anything to do with how healthy your plant will be in the long run.

Once your seeds are safely planted, you can turn on your grow light. The heat from the lamp improves germination rates, and the light can help your new cannabis seedlings open their first set of leaves. In fact, the first set of leaves will often stay yellow until they get light.

If you will be transplanting your seedlings again, avoid transplanting until they are well established and have a couple of sets of leaves (nodes). Some growers will plant seedlings in a growing medium in a solo cup or peat pot, so they can just cut away the cup for easy transplanting.

When you move seedlings around a lot, it stresses them out and potentially stunts their growth. Too much stress can even kill them. So try to plan from the beginning so that you move your seedlings around as little as possible. once they get bigger, they are a lot more hardy and can stand a lot more stress and movement.

Here are some pictures to give you an idea of the timeline to expect

Sprouted seeds planted in Hydrofarm pellets and placed on soil

If you want, you can put bottles on top to help retain extra humidity (like a cheap humidity dome).

It’s a steady 85 degrees F in there, no idea about the humidity in the bottles.

Marijuana seedlings under T5 Grow Light

Day 7 from seed

Your Cannabis Seedling’s First Few Weeks

During the first few weeks of a young marijuana plant’s life, you have to be careful.

Marijuana seedlings, especially seeds from some of the most potent strains, tend to be a bit delicate.

Seedlings definitely won’t be able to withstand full-strength grow lights or nutrients. They need to have a moist environment, but also can easily be drowned or overwatered.

If you’re planting in soil, start with a balanced potting soil that doesn’t contain extra nutrients. I recommend Happy Frog potting soil mix for young cannabis seedlings, but any plain potting mix from your local garden store will do. Never use Miracle-Gro soil or any soil that has “time-released” nutrients already mixed in. After your plants have grown a few sets of leaves, you can transfer them to a stronger potting mix that contains higher levels of nutrients like Fox Farms Ocean Forest soil, or you can start supplementing with cannabis soil nutrients. Don’t want to use nutrients? Learn how to mix up your own super soil so it has all the nutrients your cannabis plants will need!

If you’re planting in coco coir, a soilless medium, or hydroponics, only add cannabis nutrients at seedling strength, or 1/4 the regular strength, until your plants have grown a few sets of leaves. Then you can slowly start working your way up to full strength nutrient levels.

With young marijuana seedlings, less is more.

You’re trying to give young plants a very small dose of nutrients at first. However, even with young marijuana seedlings, the pH of your water and growing medium is important. Some growers get lucky and happen to have water with the right pH, but if you’re noticing deficiencies and problems with your seedlings, definitely take the time to understand about marijuana root pH and how it affects the plant’s overall health.

If you plan on eventually putting your marijuana seedlings under high intensity grow lights (such as HPS or MH grow lights), you may want to start them out with less intense fluorescent grow lights or compact fluorescent bulbs (CFLs). Or just keep your high intensity grow lights several feet away at first, and slowly move lights closer as your seedlings gets older

CFL bulbs (twisty/spiral bulbs as pictured to the right) are a great source of light for young marijuana seedlings

  • CFLs provide the right types of light for seedlings
  • CFLs are extremely cheap to buy
  • CFLs are easy on your electric bill
  • CFLs can be found almost anywhere, at your local hardware store, supermart, grocery store, or online

Keep CFLs or fluorescent lights about 6 inches away from your seedlings. Place your hand where the leaves are to make sure it doesn’t feel too hot. If it’s hot for your after 10 seconds, it’s too hot for your plants.

Once your seedlings have developed their first two sets of leaves, then you can move these lights as close as 2 inches away as long as the lights aren’t too hot.

Remember: If grow lights feels too hot to your hand after 10 seconds, they’re too hot for your marijuana seedlings

Make sure to keep a close eye on your seedlings to ensure they don’t grow too close to the grow lights and burn themselves. Seedlings can grow fast, and many growers have been surprised to find plants have actually grown into the light overnight.

If new seedlings are showing signs of stress, try moving the lights further away and see if that helps.

Once marijuana seedlings are about fourteen days old, they’re ready to start being treated as if they’re in the vegetative stage.

This Timeline Will Help Show You What to Expect

Seedling
Two round cotyledon leaves, then two “real” (serrated) single-finger cannabis leaves

Next, the single-finger leaves expand, and the next set is usually 3-finger leaves

Next, the cannabis plant will start making 5-finger leaves

Finally, most cannabis plants stop at 7-finger leaves

If you look closely at the above plant, you can see that some of the newer leaves on this plant actually have 9 fingers. It is normal for there to be some variation between leaves – some plants will grow leaves with 11 or even 13 fingers. But the above guide will give you a general idea of what to expect.

Once your cannabis seedling is about fourteen days old, it’s ready to start being treated as if in the vegetative stage.

Make sure you learn about plant training techniques to make the most of your time in the vegetative stage!

Wait! My seed is growing upside down with the roots up; what do I do?

As long as the roots of a cannabis seedling are able to grow down, they will. Roots never grow upward on their own. Seedlings can sense the difference between up and down. Roots always try to grow down. Roots never grow upwards.

So how come sometimes it looks like a cannabis plant is growing with its roots pointing up?

When the seed end is still bent down, all you see is a U-shaped stem/root

Cannabis seeds can look a bit different when germinating. When in doubt, always wait a few days to see if leaves appear before you try to interfere.

Sometimes the stem of a brand new cannabis seedling can look like the roots growing out the top. But if you wait and watch, you’ll see that it’s all part of the plan. Hope these pics help someone!

Sometimes you’ll see what appears to be roots emerging from your cannabis seed, but this is actually the stem. The stem pushes the seed and leaves up, and the main taproot is currently burrowing down to support the seedling

As the seedling emerges you’ll be able to see the leaves (sometimes it will still have the seed stuck on the first leaves, like in the picture above).

The cotyledons (first, round leaves) unfurl, and then the regular cannabis leaves between to grow. Here’s another view of that same seedling from above. Even though it may have looked a bit weird at first, this seedling is completely normal and will grow just fine from now on.

What Size Pot Should I Use?

When growing cannabis plants in a container, you have to choose the size of your pot.

A general guide is to have about 2 gallons per 12″ of height. This isn’t perfect since plants often grow differently, but this is a good rule of thumb.

When in doubt, get a bigger final container size as opposed to a smaller one. Plants that get rootbound from being in a too-small container will grow more slowly and be prone to problems. It’s not good to transfer plants during the flowering/budding stage, so you want to have your cannabis plants in their final container at least 2 weeks before the beginning of flowering/budding. How do I get my cannabis plants to start flowering?

Final Container for Desired Plant Size – General guide

2-3 gallon container

3-5 gallon container

5-7 gallon container

6-10 gallon container

8-10+ gallon container

But what size pot should you use for your seedlings?

For fastest growth rates, it’s better to plant young seedlings or clones in a very small container, like a disposable plastic solo cup.

For new seedlings and clones, use a small container if possible

The reason you want to start with a small container is that your plant’s young roots thrive on oxygen. Cannabis plant roots “breathe” oxygen, just like we breathe air, and it’s important that young cannabis roots get plenty of oxygen so the plant can grow as fast as possible.

However, young plant roots do not drink much water yet. When you water seedlings or clones in a very big container, they will use up all the oxygen quickly, and the large size of the container will prevent the growing medium from drying out.

A big plant will drink up all the water quickly, but with seedlings, you’re basically waiting for the growing medium to dry out by itself. While you’re waiting for the container to dry out, your cannabis roots are sitting in a wet environment and not getting much oxygen, slowing down their growth rates.

Poke holes in the bottom of your cup so water can drain out easily!

By planting young seeds in a small container with holes in the bottom, the growing medium will dry out much more quickly, allowing you to water more often. The young cannabis will get plenty of oxygen and water.

Alternative to Solo Cup: Start plants in seedling cube

If you don’t want to have to transplant your young plants, you can start them in a seedling plug or cube and wait until you start seeing roots come out the bottom. At that point, they will be ready to be transferred to a larger container.

What happens if I plant seeds or clones in a big container?

Your cannabis seedlings and clones will definitely survive in a bigger container; they just won’t grow as fast for the first few days or weeks because they aren’t getting as much oxygen.

With a bigger container, you will need to wait longer between waterings, and during that time your plant roots will be getting reduced oxygen.

If you’ve planted your young plant in a large container, try to give only a little bit of water at a time (enough to wet the area around the seedling roots) until the plant is growing vigorously. Once the plant has grown a few sets of leaves, you should start watering cannabis normally so that water drains out the bottom.

One of the advantages of starting young plants in a big container is you won’t have to transfer them to bigger containers as they get older.

If you would like to take advantage of faster vegetative growth from transplanting, view the Complete Cannabis Transplant Guide (with pics!)

How do I germinate marijuana seeds? Table of Contents Introduction: Cannabis Seed Germination Cannabis germination is the process of getting your seeds to sprout, and you know sprouting