Categories
BLOG

fastest way to cure weed

Fast and easy way to cure marijuana ANY TIPS RIU?

willymarijuana
Well-Known Member
Brick Top
New Member

Fast and easy do not go hand in hand with correct and best.

Read the information below and then decide if fast and easy is still your top priority.

Manicuring, Drying, And Curing Marijuana

Right after all the plants have been harvested, it is time to manicure them. Manicuring is simply cutting off the leaves that were growing from the buds. Cut off all the leaves surrounding the bud, so that just the bud remains.

Work over a glass table or some kind of smooth flat surface. This will make it easy to collect all the material that has been cut away from the buds. It is lower in THC than the buds, but rather than throw it away, you can use it to make hash oil .

When manicuring the buds, use a pair of scissors with small blades (to reach hard to get leaves) that is comfortable on your hands. If you have a small crop, you can handle the plants with you bare hands. With a large crop, wear powder free latex gloves .

The latex gloves will collect trichome resin in a similar manner to the way live marijuana plants are rubbed to make hashish. The latex gloves have to be powder free or the powder will get mixed into the resin.

Do not touch anything other than the plants once you have put the gloves on. If you have to do something, remove the gloves you are wearing and put them in a plastic bag, prior to doing whatever it is that has to be done.

When finished, put on a pair of new gloves. Material on the first pair can be collected later. When you are finished manicuring all the plants, remove the gloves and place them in a plastic bag (to catch resin that drops off).

Put the plastic bag with the gloves in a freezer for 2-3 hours. The trichome resin can easily be peeled from the frozen latex gloves and consumed the same way you would use hashish.

If absolutely necessary, you can wait to manicure the buds. However, the job will take more time if you wait. Manicuring right after the plants are harvested will also speed the drying process.

Instead smoking marijuana directly after it is harvested and manicured, it is best to dry and cure it. Some new growers might be in such a rush to try the marijuana that they don’t want to dry the crop, or they might be tempted to put buds in a microwave oven to dry them out.

Drying Marijuana After Harvest

You probably don’t want to smoke marijuana that is harsh and bad tasting. If you do not take time to dry the bud, you will not get the best possible smell and taste your crop is capable of producing.

Proper drying and curing will also ensure maximum potency of the marijuana you have grown. Marijuana is not potent just after harvest. Some of the THC is in a non-psychoactive acidic form. Drying marijuana the right way will convert the non-psychoactive acidic compounds into psychoactive THC.

The area where the drying is done should be dark. Light and high temperatures (higher than about 80 degrees) will cause THC to break down into less desirable chemicals, this will lower the potency of the finished product.

A good way to dry the crop is to hang the buds upside-down by the stem, from some string or wire. The drying marijuana must have some circulation blowing over it at all times. A gentle breeze that circulates over all the plants is necessary.

A fan or two will circulate air within the drying room. Fans will aid in drying the plants evenly, and reducing the chances of mold. If mold starts and is allowed to grow, it might ruin all of your crop. Mold looks like white fuzz and has an odor that is unpleasant.

You will have to keep the temperature and humidity within a certain range for optimal results. Conditions should remain constantly somewhere within the following ranges, temperature should be between 65-75 degrees F, relative humidity should be between 45%-55%.

At temperatures lower than 65 degrees, drying time will be lengthened. At temperatures higher than 75 degrees, the heat will cause the outer portion of the bud to dry quicker than the inner part, and the taste will suffer.

At humidity levels lower than 45%, the marijuana will dry too fast and the taste will suffer. At humidity levels higher than 55%, the marijuana will take a long time to dry, and it will be prone to mold.

Keep a hygrometer and a thermometer in the drying area, close to the plants. A hygrometer will allow you to keep an eye on the relative humidity level in the room and a thermometer will display the temperature. Some hygrometers

have built in thermometers so you can measure the temperature and humidity together.

Depending on the time of year and your location, a heater or an air conditioner may be necessary to adjust the temperature. To control humidity, a dehumidifier can lower humidity and a humidifier can be used to raise humidity.

There are warm mist humidifiers and cool mist humidifiers. A warm mist humidifier will raise the temperature while a cool mist humidifier will not affect the temperature. There are also humidifiers that allow you to switch between warm or cool mist. If you are going to purchase a humidifier for this purpose, take your climate into consideration and buy an appropriate humidifier.

Warm mist models will actually heat the water and release warm humidity. Cool mist water isn’t cooled, it just means that water is not heated. In most cases a cool mist will work best. To be safe you can get a humidifier that lets you switch between warm and cool mist.

Curing Marijuana

It will take at least a week or two to dry the crop with temperatures between 65-75 degrees F and relative humidity between 45%-55%. You will know when the marijuana is dry if the stems snap or break (rather than fold) when they are bent. Try smoking a small bud (1/2 gram or less) in a joint to be sure it is dry enough.

At this time, small buds will be dry enough to smoke. But larger buds should be cured (slow dried) to ensure that the marijuana is as potent and tasty as possible. If necessary, you can set aside buds that are less than 1/2 gram for smoking, while larger buds cure.

The cure lasts a week or two. The aim of what you are doing is evenly finishing the slow dry process, so that mold will not grow when the buds are stored long term. Also, by the end of the cure, any remaining inactive THC will be converted to active THC (that increases potency).

To cure the crop, you will need one or more containers made out of glass or plastic. Some people say plastic can impart a taste to the marijuana. Personally, plastic containers that some types of roll your own tobacco are sold in, have no negative effect on the taste.

Containers that have a rubber seal work best, but any type of container with a tight fitting lid will do. One quart canning jars do a very good job if you are curing a few pounds or less. They have a rubber seal and hold 2 or more ounces of marijuana per one quart jar.

When curing quantities in excess of a few pounds, large (over 40 quarts) plastic storage boxes

are recommended. They are not air tight, but will do the job when smaller air tight containers are not practical.

Gently place your marijuana in the containers (cut buds to size if the are too big to fit in the container) and put the top on. Store the containers in a dark area where the temperature is between 50-65 degrees and the humidity is between 40%-60%.

You will have to open the containers for a few minutes to allow moisture to escape by fanning with your hand. If any moisture builds up on the inside of the cap on your container, wipe it off. Do this preferably 2-6 times daily, at regular 4-12 hour intervals.

You should also re-arrange the buds by giving them a quarter-turn once a day. This will ensure that different parts of the buds are exposed to the air in the container. Keep up this routine for 7-10 days. When properly dried, marijuana will burn evenly when smoked in a joint (if stems are removed).

The taste will be as good as it can be, and the THC will have reached a point where it is ready to be ingested or stored. You can keep any marijuana that will be consumed within a few months (1 year maximum) in the same containers used for curing, without having to keep opening them to release moisture.

If the marijuana is to be stored for more than a few months, you can use a vacuum sealer (designed for storing food) to seal the marijuana in an airtight environment.

If stored in a dark area that is between 40-55 degrees F, the marijuana in vacuum sealed plastic will remain potent for up to 5 years.

Dry marijuana can be stored in a frost-free freezer, but some of the THC on the outer part of the buds may be damaged when frozen. A refrigerator is in the right temperature range but they tend to be humid (unless you can control the humidity).

If stored in an area of high humidity for months or years, even vacuum sealed marijuana can eventually become as humid as the surrounding air. This will necessitate drying it again before smoking. But, unless mold develops, humidity itself will not degrade the THC or make the marijuana any less potent.

Light will degrade some of the THC, so dark containers can be used for storage. If you place the marijuana in a see through container, it will have to be located in a dark area that is not exposed to light or high temperatures.

Always make sure to properly dry your marijuana prior to storage, if you grow your own or if the stuff you have is very moist. And remember that to preserve marijuana potency at a maximum level, keep any exposure to air, heat, and light at a minimum.

I need all riu help does anyone have any tips on curing your bus a fast and easy way ?

How To Dry Cannabis Quickly

You want the truth about quick drying cannabis? We think you can handle it. So in this blog, we’ve compiled the best methods to get you a fast stash post-harvest. We can’t promise perfection but these methods will put a rush on the drying process and give you a decent bud to toke on.

OK, so you have cannabis plants close to harvest and insufficient marijuana reserves to see you through the typical 30+ day period between harvest and cured finished product. Perhaps you don’t even have a stash to make it through the average 1–2 weeks it takes to dry buds conventionally? Or perhaps you are just curious whether or not your flowers are ready to harvest? Regardless of your personal motivations, you have plenty of options when it comes to quickly drying cannabis. The problem is, the most popularised quick-dry methods will degrade buds so much in the process, they are hardly worth the effort.

Our readers deserve better. Not only will we break down simple ways to speed-dry Sinsemilla without ruining your reefer. We have also included a sticky surprise in the text for those cannabis concentrate lovers seeking more flavoursome extracts using the fresh non-dried material.

BROWN BAGS AND COMPUTER FANS

Simple brown paper bags, like the kind you get from the bakery, are perfect for drying buds. Especially popcorn buds. If you place a handful or two of freshly manicured smaller nuggets into a paper bag and leave them to dry for 2–3 days your halfway there. Ideally, you should leave them another 3 days to dry completely. But if you’re in a hurry, proceed to the next step.

Next, turn on your laptop and figure out where the fan is. Modern laptops all have fans expelling warm air to keep the internal workings of the device cool. Place the small half-dry nuggets on a paper towel on the keyboard. Or on a paper towel directly in front of the fan vents, if you have a model that vents a different way. Turn buds over every 10 minutes or so, until they feel dry to the touch. This may take an hour or longer, but the buds will still pack a punch. Don’t expect a full bouquet of aromas or mouth-watering flavour, rather an acceptable if a little harsh tasting smoke.

CONVERT THE BOILER ROOM INTO A DRYING BOX

Most private homes have a boiler room. The water boiler inside keeps the boiler room temperature pretty cosy and relative humidity is minimal. This is a great place to quick-dry cannabis. It’s best to place all small buds in brown bags, but you can use string to hang bigger buds as you usually would when drying. The big difference is that you are going to turn up the heat by switching on the hot water heater. You can completely dry huge harvests in 3 days if you leave the hot water on for most of that time. That’s sure to spike the utility bills. With normal use, expect the small buds to be dry enough to smoke in just 3–4 days, with thicker hanging colas requiring 6–7 days. This method has a lower impact on quality than most, but the buds still won’t taste fantastic.

ALTERNATIVE: GO LIVE

The dabbing trend of 2018 is live resin concentrates. Even the most potent extracts like wax and shatter have some room for improvement. Using fresh frozen flowers rather than carefully dried and cured buds is the breakthrough US extract artists have made to produce gourmet concentrates with far more terpenes. Something is definitely lost in transition with the standard BHO extraction methods. Live resin boasts the same skyhigh potency with a vastly improved flavour profile. Unfortunately, this is probably out of reach to the average ordinary home grower. The cannabis must be kept at subcritical temperatures for the entire extraction process and you really need lab conditions and equipment to accomplish this. Nonetheless it’s a top-shelf treat coming to all good cannabis clubs, coffee shops, and dispensaries in 2018. Be on the lookout for names like “sauce”, “sap”, and “syrup” popping up on the menu.

SUN-DRIED WEED

Outdoor ganja farmers have dried marijuana placed on rocks in direct sunlight for thousands of years. It’s certainly not the most efficient method to dry cannabis, but it works. Both heat and sunlight will degrade quality. However, if you want to dry small buds fast and it’s hot and sunny outside, you could do worse than tossing a handful of popcorn buds in a brown bag and sun-drying them. Best use a rock to weigh down the bag of buds in direct sunlight, you don’t want a gust of wind swiping your weed. Then you play the waiting game. After a day or two of warm dry sunny weather, you should have some crispy buds to toke on. Again flavour and potency will have deteriorated, so you are not getting the most from your marijuana with this method.

DESPERATE MEASURES

Baking buds in the oven is a horrible idea. Just don’t do it. It really is a waste of weed. Oven temperatures are far, far, far too hot for cannabis. Even on a low setting—still too hot. Sure the buds will dry out in minutes, but you’ll also have cooked off most of the cannabinoids. These buds will taste like burnt plant material and won’t get you high.

Microwave marijuana is another guaranteed disappointment. Nuking buds with 10-second blasts in the microwave is a disastrous way to dry weed. These methods likely origins are “the big book of bad ideas” and are to be avoided.

We all know that you really ought to slowly dry and cure marijuana. Sometimes you need to test for potency or just need a stash. Let’s talk quick drying weed.